Click on component for more information.
Brew 5 to 25 gallon batches!
Kettle Back to System
- -15.5 U.S. Gallon
- 304 Stainless Steel
- Reconditioned beer kegs
- - major dents removed
- chines streightened
- cleaned and acid dipped
- (1) copper internal drain
- (2) 1/4" FIP thermometer fittings
- (2) copper thermometer wells
- 12" opening cut in the top
- - special slot that allows the chiller
or hose access with the lid in place
Valve Back to System
- Bronze valve assembly
- 1/2" ball valve
- adapted to the kettle
- 3/4" male garden hose
Stainless steel valve assembly
- 1/2" ball valve
- adapted to the kettle
- bronze 3/4" male garden hose
Thermometer Back to System
- -
Drain Hose Back to System
- - stainless steel braided rubber hose
- (1) 3/4" female garden hose fittings
- (1) 3/8" male or female flair fitting
- rated to 250F
- 3/8" dia. 16" long
- sets up a siphon to drain the kettle completely
Lid Back to System
- - 12" stainless steel lid
- one for each kettle
Screen Back to System
- Copper Screen
- 15.375" Diameter
- 2 piece
- slotted perferations (.046"x.3125" )
Support Back to System
- Stainless Steel Support
- removable
- designed to fit 15.375" dia. kettle
- 2.25" tall
Chiller Back to System
- Copper Wort Chiller
- 50' Copper coil
- a second chiller can be used in a bucket of
ice if your gournd water is too warm to cool the wort.
Paddle Back to System
- - Handsome 36" long hand crafted wooden paddle
Pump Back to System
- The pump is used to:
- pump water to the mash
- circulate wort in the mash
- pump wort to the boiler
- circulate wort to speed cooling
- pump wort to the fermenter
pico-Pump
-1/100th HP - 115VAC
- magnetically coupled
- bronze pump head
- recirculating pump
- rated to 230F
- pumps 2-3gpm - 3' head
nano-Pump
-1/25th HP - 115VAC
- magnetically coupled
- bronze pump head
- recirculating pump
- rated to 230F
- pumps 5-6gpm - 11' head
Hose Back to System
- - stainless steel braided rubber hose
- (2) 3/4" female garden hose fittings
- rated to 250F
- available in (2) sizes
- - 3/8" dia. 48" long
- 1/2" dia. 60" long
Sparge Head Back to System
- - 4" diameter
- stainless steel screen
- rated to 230F
Burner Back to System
- Multi-jet Burner
- 170,000 BTU burner output
- includes hose(s) manifold and high pressure regulator
- Propane Only
- uses half the gas of the original jet burner.
- Original Jet Burner
- 200,000 BTU output with propane
- 100,000 BTU output with natural gas
- includes hose(s) manifold and high pressure regulator